3xLOGIC VISIX Camera User Manual

Page 30

Advertising
background image

User  Manual|  

VISIX  Network  Camera  

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

30  

!

Record  File  Size:  Select  the  packed  size  of  the  manually  recorded  and  downloaded  video  
files  to  256M,  512M  or  1G.  After  the  selection,  the  maximum  record  file  size  is  the  value  
you  selected.    

!

Save  record  files  to:  Set  the  saving  path  for  the  manually  recorded  video  files.    

!

Save  downloaded  files  to:  Set  the  saving  path  for  the  downloaded  video  files  in  playback  
mode.    

!

Picture  and  Clip  Settings:  Set  the  saving  paths  of  the  captured  pictures  and  clipped  video  files.  Valid  
for  the  pictures  you  captured  with  the  web  browser.    

!

Save  snapshots  in  live  view  to:  Set  the  saving  path  of  the  manually  captured  pictures  in  
live  view  mode.    

!

Save  snapshots  when  playback  to:  Set  the  saving  path  of  the  captured  pictures  in  playback  
mode.    

!

Save  clips  to:  Set  the  saving  path  of  the  clipped  video  files  in  playback  mode.    

 

Note:  

You  can  click  Browse  to  change  the  directory  for  saving  the  clips  and  pictures.    

3) Click  Save  to  save  the  settings.    

 

6.2 Configuring  Time  Settings    

Purpose:      
You  can  follow  the  instructions  in  this  section  to  configure  the  time  synchronization  and  DST  settings.    
 

Steps:    

1) Enter  the  Time  Settings  interface:    

Configuration  >  Basic  Configuration  >  System  >  Time  Settings      
Or  Configuration  >  Advanced  Configuration  >  System  >  Time  Settings      

 

 

Figure  6-­‐2

Time  Settings  

 

2) Select  the  Time  Zone.    

Select  the  Time  Zone  of  your  location  from  the  drop-­‐down  menu.    

3) Synchronizing  Time  by  NTP  Server.    

a. Check  the  checkbox  to  enable  the  NTP  function.    
b. Configure  the  following  settings:      

!

Server  Address:  IP  address  of  NTP  server.    

Advertising