3xLOGIC VISIX Camera User Manual
Page 76
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
76
Figure 10-‐9 Modify an IP
3) Click the OK to finish modifying.
Delete an IP Address
4) Left-‐click an IP address from filter list and click Delete.
Delete all IP Addresses
5) Click
Clear
to
delete
all
the
IP
addrsses.
6) Click
Save
to
save
the
settings.
10.5 Viewing Device Information
Enter the Device Information interface:
Configuration > Basic Configuration> System > Device Information Or Configuration > Advanced
Configuration> System > Device Information In the Device Information interface, you can edit the
Device Name.
Other
information
your
network
camera,
such
as
Model,
Serial
No.,
Firmware
Version,
Encoding
Version,
Number
of
Channels,
Number
of
HDDs,
Number
of
Alarm
Input
and
Number
of
Alarm
Output
are
displayed.
The
information
cannot
be
changed
in
this
menu.
It
is
the
reference
for
maintenance
or
modification
in
the
future.
Figure 10-‐8
Device Information
10.6 Maintenance
REBOOTING THE CAMERA
Steps:
1) Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance Or Configuration >
Advanced Configuration> System > Maintenance:
2) Click Reboot to reboot the network camera.