3xLOGIC VISIX Camera User Manual
Page 59
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
59
If
you
enable
the
face
detection,
once
a
face
appears
in
the
surveillance
area,
it
will
be
detected
and
certain
actions
may
be
triggered
by
the
detection.
Figure 6-‐44
Face Detection Interface Steps:
1) Enter the face detection settings interface:
Configuration > Advanced Configuration > Events > Face Detection
2) Check
the
Enable
Face
Detection
to
checkbox
to
enable
the
function.
3) (Optional)You
can
check
the
Enable
Dynamic
Analysis
for
Face
Detection
checkbox
if
you
want
the
face detected get marked with rectangle in the live view.
Note:
Select disable the rules from Configuration-‐Local Configuration-‐Live View Parameters-‐Rules
if you don’t want the detected face marked with the green frame.
4) Configure
the
sensitivity
[1~5]
of
the
face
detection.
5) (Optional)You
can
also
configure
the
linkage
action
for
face
detection.
Note
:
The face detection is only supported by a certain series of camera modes. And it doesn’t
support any linkage method.
CONFIGURING AUDIO EXCEPTION DETECTION
Purpose:
Audio
exception
detection
detects
the
abnormal
sounds,
such
as
the
silence
detection,
environment
noise
detection,
and
current
noise
detection.
Enabling
the
Sudden
Change
of
Sound
Intensity
can
detects
the
change
of
the
sound
volume
and
source
in
the
environment.
!
Sensitivity:
Range
[1-‐100],
the
smaller
the
value
the
more
severe
the
change
should
be
to
trigger
the
detection.
!
Sound
Intensity
Threshold:
Range
[1-‐100],
it
can
filter
the
sound
in
the
environment,
the
louder
the
environment
sound,
the
higher
the
value
should
be.
You
can
adjust
it
according
to
the
real
environment.
Arming Schedule is configured to set the time you want the function to be enabled.
1) Click
Edit
to
set
the
arming
schedule.
2) Choose
to
trigger
alarm
actions
as
Notify
Surveillance
Center
and
Send
Email,
Upload
to
FTP
and
Trigger Channel or trigger the Alarm Output.
3) Click Save to save the settings.