1 installation – 3xLOGIC VISIX Camera User Manual

Page 7

Advertising
background image

Installation  Manual  

|  VISIX  PTZ  Network  Camera  

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

7  

1 Installation  

Please  make  sure  that  the  device  in  the  package  is  in  good  condition  and  all  the  assembly  parts  are  included.    

 

NOTE:

 

Do  not  drag  the  speed  dome  with  its  waterproof  cables  as  shown  in  Figure  1-­‐1,  otherwise  the  waterproofing  can  

be  damaged  and  rendered  ineffective.  

 

Figure  1-­‐1 Do  Not  Drag  the  Cables  

1.1 INSTALLATION  AND  CABLING  

Installing  the  Speed  Dome  

Steps:  
1) Loosen  the  two  lock  screws  on  the  both  side  of  the  speed  dome.  Pull  the  lower  dome  to  separate  it  from  the  back  

box  as  shown  in  Figure  1-­‐2.  

NOTE:

 

Please  do  not  remove  the  lock  screws  from  the  dome.  

2) Remove  the  protective  foam,  sticker  and  lens  cover  from  the  dome  drive.  
3) Align  the  cuts  on  the  lower  dome  with  the  lock  screws  on  the  back  box  to  reinstall  the  lower  dome.  Tighten  the  lock  

screws.  

Advertising