Datamax E-Class E-4304 - Manual (Page 23)

E-4203/E-4204/E-4304 13
3.4 Flash Memory Expansion
The printer can be equipped with an optional Flash Memory Expansion.
This flash expansion can be used for storage of label formats and fonts.
For font downloading instructions refer to Section 5.8 in this manual.
To install the Flash Memory Expansion:
ΠTurn the power off and
unplug the printer.
Remove any installed
media from the printer.
• Using a coin, flathead
screwdriver, or similar
object, insert it into the
Slot on the underside of
the printer and gently pry
the Expansion Cover off
the printer.
Ž With the Flash Memory
Expansion Assembly
oriented as shown
(connector down), gently
insert it into the Expansion
Bay until the assembly is
firmly seated.
Note: When using a blank expansion module for the first time the
printer will automatically format it when the printer is powered
up. This initial format can take up to one minute.