Datamax E-Class E-4304 - Manual (Page 31)

E-4203/E-4204/E-4304 21
17) INTERNAL MODULE
Sets the number of 4K Byte blocks
allocated for the internal RAM
module.
Possible Values:
0 – 255; default = *128
18) LABEL ALIGNMENT
(see section
4.5 for more information)
Sets Label Alignment Method.
Possible Values:
YES (printer uses ‘ALIGNMENT
LENGTH’ or host sent value)
AUTO (printer will automatically
determine label length)
* NO (Label Alignment disabled)
19) ALIGNMENT LENGTH
(see
section 4.5 for more information)
Leading edge to leading edge
distance of two successive labels.
Must be set when ‘LABEL
ALIGNMENT’ is set to Yes.
Possible Values:
0 – 999; default =100*
Units: .01 inch
20) STOP LOCATION
Sets convenient stop locations for
different printer configurations.
Possible Values:
*HOST (printer uses host values of SOP
and Present Distance)
PEEL (sets stop location just behind the
peel bar)
CUT (sets stop location at the cutter
blade)
COVER (sets stop location at the tear plate)
NONE (printer uses normal start location
and ignores host commands)
* = Default Setting
All of the menu items listed in the previous tables are stored in non-volatile memory.