ADLINK LPCI-7230 - Manual (Page 29)

Installation 21
2 Installation
This chapter describes the configurations of the PCI-/cPCI-/LPCI-/
LPCIe-723X Series. The PCI-/cPCI-/LPCI-/LPCIe-723X Series is
Plug and Play and can easily be installed onto any PC system with
PCI slots.
2.1 What You Have
X This User’s Manual
X PCI-/cPCI-/LPCI-/LPCIe-723X Series Isolated Digital I/O
Card
X ADLINK CD
X Software Installation Guide
If any of these items are missing or damaged, please contact the
dealer from whom the product was purchased. Save the shipping
materials and carton for future storage or shipping purposes.
2.2 Unpacking
Your PCI-/cPCI-/LPCI-/LPCIe-723X Series card contains sensitive
electronic components that can be easily damaged by static elec-
tricity.
The card should be placed on a grounded anti-static mat. The
operator should wear an anti-static wristband, grounded at the
same point as the anti-static mat. Inspect the card module carton
for obvious damage. Shipping and handling may cause damage to
the module. Ensure that there are no shipping and handing dam-
ages on the module before processing.
After opening the card module carton, extract the system module
and place it only on a grounded anti-static surface component side
up.
Again, inspect the module for damage. Press down on all sock-
eted ICs to make sure they are properly seated. Do this only with
the module placed on a firm flat surface.
Note: Do not apply power to the card if it has been damaged.