ADLINK PXIS-3320 - Manual (Page 21)

Installation 13
3 Installation
The chapter describes the procedures on how to install the system
controller to the PXIS-3320 chassis. It also provides information
on how to power up and monitor the system.
3.1 Calculating Power Consumption
Before installing any modules into the PXIS-3320 chassis, calcu-
late the total system power requirement and check the power sav-
ing requirements for each DC power source including the +5 V,
+3.3 V, +12 V, and -12 V supply rail. Refer to Appendix A for the
maximum usable power.