ADLINK PCI-7841/cPCI-7841 - Manual (Page 10)

2 Introduction
The cPCI-7841 is a Dual-Port Isolated CAN Interface Card with
the following features:
X Two independent CAN network operation
X Bridge function supports
X Compatible with CAN specification 2.0 parts A and B
X
Optically isolated CAN interface up to 2500 Vrms isolation
protection
X
Direct memory mapping to the CAN controllers
X
Powerful master interface for CANopen, DeviceNet and
SDS application layer protocol
X Up to 1Mbps programmable transfer rate
X Supports standard DeviceNet data rates 125, 250 and 500
Kbps
X
PCI bus plug and play
X
compact-PCI industry bus
X
DOS library and examples included
The PM-7841 is a Dual-Port Isolated CAN Interface Card with the
following features:
X Two independent CAN network operation
X Bridge function supports
X Compatible with CAN specification 2.0 parts A and B
X
Optically isolated CAN interface up to 2500 Vrms isolation
protection
X
Direct memory mapping to the CAN controllers
X
Powerful master interface for CANopen, DeviceNet and
SDS application layer protocol
X Up to 1Mbps programmable transfer rate
X Supports standard DeviceNet data rates 125, 250 and 500
Kbps
X
DIP-Switch for base address configuration
X
Software Programmable Memory-Mapped Address
X
PC-104 industry form factor
X
DOS library and examples included