ADLINK cPCI-3538 - Manual (Page 18)

12
• Introduction
cPCi-R3544 Rear I/O Daughter Board (Rear I/O function only for
cPCI-3544R)
The cPCi-R3544 rear I/O daughter board provides a rear I/O connection
transition, the connector and cable used in the rear is the same as the
front.
DIP Switch and Jumper Setting
CARD NO. Port Select
SW1-3 # PortA PortB PortC PortD
000 0 SW On Off On Off On Off On Off
100 1 4 485 422
010 2 5 485 422
110 3 6 485 422
001 4 7 485 422
101 5
011 6
111 7
The JP1, JP3, JP5, JP7 is for the RS422 terminator and the JP2, JP4, JP6,
JP8 is for the RS-485 terminator. The terminator is ON while the jumper is
ON.