ADLINK LPCIe-3488A - Manual (Page 24)

14 Installation
2.5 Hardware Installation
LPCIe/LPCI-3488A Installation Procedures
Please follow the instructions to install the LPCIe/LPCI-3488A in
your system.
1. Turn off the computer
2. Turn off all accessories (printer, modem, monitor, etc.)
connected to the computer.
3. Open the computer case.
4. For LPCI-3488A, select a 32-bit PCI slot.
For LPCIe-3488A, select a PCIe x1 slot.
5. Before handling the PCI cards, discharge any static
buildup on your body by touching the metal case of the
computer. Hold the edge of the board and do not touch
the components.
6. Position the board into the selected PCIe/PCI slot.
7. Secure the card in place at the rear panel of the system.
8. Replace the computer case cover.
Turn on the computer, and install the software according to the
instructions in Software Installation.
USB-3488A Installation Procedures
Please follow the instructions to connect the USB-3488A to the
computer or notebook.
1. Connect USB-3488A to any USB 2.0 port
2. After several seconds, the "Ready" LED become Green,
USB-3488A is ready for work.