ADLINK LPCIe-3488A - Manual (Page 30)

20 Installation
Using the ADLINK GPIB Utility
1. Launch GPIB Utility.exe. A window appears showing all
installed GPIB interfaces and instruments
2. Click on a GPIB interface (GPIB0, GPIB1, etc.) and
select “Setting” > “GPIB Preference”. A “GPIB Interface
& Bus Setting” dialog appears to enable configuration of
the GPIB interface.
NOTE: NOTE:
The ADL-GPIB driver package also provides the ADLINK GPIB
Utility to diagnose and verify GPIB connections, located at
x:\ADLINK\ADL-GPIB\Utility\GPIB Utility.exe