Eist, Turbo mode, 4 sata configuration – ADLINK cPCI-3510 Series User Manual
Page 111: Sata controller(s), Sata mode selection
Advertising
BIOS Setup Utility
97
cPCI-3510
EIST
Set this value to Enabled/Disabled.
Turbo Mode
Set this value to Enabled/Disabled.
8.3.4
SATA Configuration
You can use this screen to select options for the SATA Configura-
tion Settings. An example of the SATA Configuration screen is
shown below.
SATA Controller(s)
Enable or disable SATA device.
SATA Mode Selection
The SATA can be configured as a legacy IDE, RAID and AHCI
mode.
Advertising