ADLINK cPCI-3510 Series - Manual (Page 139)

IPMI User Guide 125
cPCI-3510
9.3 OEM Commands Summary Table
OemShowRevision
This command is used to show the current information of the firm-
ware including the firmware revision, the product ID, and addi-
tional features.
Command NetFn Code Cmd Code
OemShowRevision OEM (C0h) 12h
OemRescanGaInput OEM (C0h) 22h
OemTestFunction OEM (C0h) 30h
OemReportGeoAddress OEM (C0h) F0h
OemEnableSmbus OEM (C0h) F2h
OemDisableSmbus OEM (C0h) F3h
OemDispDebugVariable OEM (C0h) F4h
OemResetHost OEM (C0h) F5h
OemPowerOff OEM (C0h) F6h
OemPowerOn OEM (C0h) F7h
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 12h OEM defined command
Response
0 Complete Code 00h means OK
1 A5h Internal check byte. Always A5h
2 Firmware Rev ‘V’ in ASCII code for verification
3 Firmware Rev Revision info high byte
4 Firmware Rev Revision info low byte
5 Product ID ‘P’ in ASCII code for verification
6 Product ID Product info high byte
7 Product ID Product info low byte
8 Special info ‘S’ in ASCII code for verification
9 Special info Addition info byte
10 5Ah Internal check byte. Always 5Ah