ADLINK CT-31 - Manual (Page 16)

4 Introduction
1.5 Package Contents
The CT-31 is packaged with the following components. If any of
the items on the contents list are missing or damaged, retain the
shipping carton and packing material and contact the dealer for
inspection. Please obtain authorization before returning any prod-
uct to ADLINK. The packing contents of the CT-31 Series are
non-standard configurations and may vary depending on customer
requests.
Processor Blade
X The CT-31 Series Processor Blade
Z CPU, RAM specifications will differ depending on
options selected
Z Thermal module is assembled on the board
X ADLINK All-in-One CD
X User’s manual
Rear Transition Module
X cPCI-R3610T: 8HP width, 80mm depth Rear Transition
Module with 2x COM, USB, 2x GbE, 2x SATA, VGA
NOTE: NOTE:
The contents of non-standard CT-31 configurations may vary
depending on the customer’s requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.