ADLINK CT-31 - Manual (Page 41)

Driver Installation 29
CT-31
5 Driver Installation
The CT-31 drivers are available on the ADLINK All-In-One CD at
X:\cPCI\cPCI-3610\, or from the ADLINK website
(http://www.adlinktech.com). This section describes the driver
installation procedures for Windows® XP.
1. Install the Windows operating system before installing
any driver. Most standard I/O device drivers are installed
during Windows installation.
2. Install the chipset driver by running the program
...\Chipset\infinst911autol.exe.
3. Install the VGA driver and utilities by running the program
...\Graphics\[CPU type]\ winxp.zip\setup.exe.
4. Install the LAN driver by running the program
…\LAN\PROXP.exe.
We recommend using the drivers provided on the ADLINK
All-in-One CD or downloaded from the ADLINK website to ensure
compatibility. Contact ADLINK to get support for VxWorks BSP.