ADLINK cPCI-6620 - Manual (Page 39)

Getting Started 27
cPCI-6620
5 Getting Started
This chapter describes the installation of the following components
to the cPCI-6620 and rear transition modules:
X Memory modules
X 2.5” SATA hard drive
X 2.5" SATA storage drive
5.1 CPU and Heatsink
The cPCI-6620 Series comes with CPU and heatsink pre-installed.
Removal of heatsink/CPU by users is not recommended. Please
contact your ADLINK service representative for assistance.
5.2 Memory Module Installation
The cPCI-6620 provides two 240-pin DIMM sockets for
DDR3-1066/1333 memory modules.
Installing a memory module
1. Insert the memory module until it properly seated shown
as below.