ADLINK cPCI-6620 User Manual
Page 41
Advertising
Getting Started
29
cPCI-6620
2. Turn the drive top side up and align the drive with the
onboard SATA connector as shown. Insert the drive until
it is properly seated in the connector.
3. Turn the cPCI-6620 solder side up, being careful to sup-
port the SATA drive. Secure the drive with four M3
screws as shown below.
CAUTION:
Support the hard drive assembly to avoid damaging the SATA
connectors when turning the board over to proceed with Step 3.
Advertising