ADLINK CT-61 - Manual (Page 12)

2 Overview
1.2 Features
X 6U CompactPCI SBC in 4HP width form factor
X µFC-BGA package Intel® Core™ i7 processor, up to 2.53GHz
X Mobile Intel® BD82QM57 PCH (Platform Controller Hub)
X Dual Channel DDR3 ECC SDRAM at 800 or 1066MHz sol-
dered onboard, up to 8GB
X 64-bit/66MHz CompactPCI Interface based on PCI specifica-
tions, 3.3V and 5V signaling
X Supports operation in system slot as system master or in
peripheral slot with connectivity to CompactPCI bus* (optional
isolation from CompactPCI bus)
X Dual PMC sites with 64-bit/133MHz PCI bus
X Single XMC site with PCIe x8 lane (shared with inner PMC
site)
X -40°C to 85°C operating temperature (at wedge locks)
X RTM models available with multiple I/O options: SATA, HD
audio, COM, USB, Gigabit Ethernet, PS/2 KB/MS, PIM, SAS,
SCSI, CF, SD socket
X Hardware RAID on SCSI, SAS interfaces supported (depen-
dent on RTM module)
NOTE: NOTE:
*See “Programming NT Mode EEPROM Map” on page 41 for
instructions on how to set the PCIe-to-PCI bridge on the CT-61
to NT-mode to allow operation in a peripheral slot.