ADLINK cPCIS-1100A Series - Manual (Page 15)

Backplane • 11
3 Backplane
In this chapter, we will describe the backplanes for the cPCIS-1100 Series
subsystems. The following table specifies the backplane(s) that correspond
to each model.
backplane slots
power
backplane
cPCIS-1100A[R] cBP-3208[R] 8 —
cPCIS-1101[R] cBP-3208[R] 8 cBP-3061
cPCIS-1102[R] cBP-3208[R] 8 cBP-3062A
cPCIS-1202[R]
(dual system)
cBP-3206[R]
(x2)
6
(x2)
cBP-3061
(x2)
cPCIS-ET1101 cBP-3208 8 cBP-3061
cPCIS-ET1102 cBP-3208 8 cBP-3062A
3.1 cBP-3208[R] Backplane
The cBP-3208[R] is a 3U CompactPCI 32-bit backplane with optional rear I/O
(designated by an “R” suffix). It is used by the cPCIS-1100A / cPCIS-1101 /
cPCIS-1102 / cPCIS-ET1101 / cPCIS-ET1102.
Specifications
Standard CompactPCI height for 3U cPCI cards
CompactPCI Compliancy
PICMG 2.0 CompactPCI core specification R3.0
PICMG 2.1 CompactPCI hot swap R2.0
Dimensions: 141.3 x 128.7 mm
PCI bus clock: up to 32-bit/33MHz
System Slot: one R-hand side dual-slot
System Slot Rear I/O: P2 rear I/O with AB-type shroud