ADLINK VPX6000 - Manual (Page 19)

Introduction 7
VPX6000
1.5 Package Contents
The VPX6000 is packaged with the following components. If any
of the items on the contents list are missing or damaged, retain the
shipping carton and packing material and contact the dealer for
inspection. Please obtain authorization before returning any prod-
uct to ADLINK. The packing contents of the VPX6000 are
non-standard configurations and may vary depending on customer
requests.
Processor Blade
X VPX6000
Z CPU and memory specifications will differ depending on
options selected
Z Thermal module is assembled on the board
X ADLINK Driver USB Flash Drive
Rear Transition Module
X VPX-R6000 RTM
Test Backplane
X tBP-VPX6000 test backplane
X DVI to VGA adapter
NOTE: NOTE:
The contents of non-standard VPX6000 configurations may
vary depending on the customer requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.