ADLINK ASD26-MT1 ET Series - Manual (Page 15)

Specification 15
1.6 Architecture
The ASD26 series 2.5" SATA Solid State Drive (SSD) utilizes a cost effective system-on-chip (SoC) design to
provide a full 6 Gb/s bandwidth with the host while managing multiple flash memory devices on multiple
channels internally.
1.7 Hot Plug Support
Hot Plug insertion and removal are supported when the correct connector and an appropriate operating
system (OS) are used as described in the SATA 3.0 Specification. This product supports asynchronous signal
recovery and will establish communications with a host system without hardware device detection by
issuing an unsolicited COMINIT when first mated with a powered connector.