ADLINK ASD26-MT1 ET Series - Manual (Page 26)

26 Specification
4 SATA Command Sets
4.1 SATA Command
The SATA 3.0 Specification is a super set of the ATA/ATAPI-8 specification with regard to supported
commands. The ASD26-MT1 series 2.5" SATA 6.0 Gb/s SSD supports the following features which are
unique to the SATA 3.0 Specification.
4.1.1. Software Settings Preservation
The ASD26 series 2.5" SATA SSD supports the SET FEATURES parameter to enable/disable the
preservation of software settings.
4.1.2. Native Command Queuing
The ASD26 series 2.5" SATA SSD supports the Native Command Queuing (NCQ) command set, which
includes.
．READ FPDMA QUEUED
．WRITE FPDMA QUEUED
Note: with a maximum queue depth equal to 31