ADLINK ASD26-MT1 ET Series - Manual (Page 5)

Specification 5
1 Introduction
1.1 Overview
The ASD26 (ASD26-MT1) series 2.5" SATA Solid State Drive (SSD) delivers leading performance in an industry
standard 2.5" form factor while simultaneously improving system responsiveness for mobile applications over
standard rotating drive media or hard disk drives. By combining leading NAND flash memory technology with
our innovative high performance firmware, ADLINK delivers a SSD for native Serial Advanced Technology
Attachment (SATA) hard disk drive drop-in replacement with enhanced performance, reliability, ruggedness and
power savings. Since there are no rotating platters, moving heads, fragile actuators, or unnecessary delays due
to spin-up time or positional seek time that can slow down the storage subsystem, significant I/O and
throughput performance improvement is achieved as compared to rotating media or hard disk drives. This
document describes the specifications of the ASD26 series 2.5" SATA SSD in 2.5" form factors.
The ASD26 series 2.5" SATA SSD primarily targets SATA based servers, fanless laptop PCs, highly rugged mobile
client devices, as well as thin and light mini/sub-notebooks. Key attributes include high performance, low
power, increased system responsiveness, high reliability, and enhanced ruggedness as compared to standard
mobile SATA hard drives. The ASD26 series 2.5" SATA SSD is available in a 2.5" form factor that is electrically,
mechanically, and software compatible with existing 2.5” Serial ATA slots and cables. Our flexible design allows
interchangeability with existing mobile hard drives based on the SATA interface standard.
1.2 Product Specification
1.2.1. Form Factor: 2.5” SSD form factor
1.2.2. Capacity: 32 GB (ASD26-MT1032-CT/ ASD26-MT1032-ET)
64 GB (ASD26-MT1064-CT/ ASD26-MT1064-ET)
128 GB (ASD26-MT1128-CT/ ASD26-MT1128-ET)
256 GB (ASD26-MT1256-CT/ ASD26-MT1256-ET )
512 GB (ASD26-MT1512-CT/ ASD26-MT1512-EP )
CT: Commercial Temperature 0 to +70°C, ET: Extend Temperature ‐40°C to +85°C
EP: Extend Temperature ‐40°C to +85°C with PLDP (Power loss data protection)
Unformatted capacity
Total user addressable sectors
in LBA mode
32GB 62,533,296
64GB 125,045,424
128 GB 250,069,680
256 GB 500,118,192
512 GB 1,000,215,216
Table 1: User Addressable Sectors
Notes: 1. 1GB=1,000,000,000 bytes and not all of the memory can be used for storage.
2. 1 Sector = 512 bytes