ADLINK Express-IB - Manual (Page 53)

Express-IB Page 53
7.3.8. AMT Configuration
Intel AMT
Enable/Disable Intel Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the
BIOS extension execution. If enabled, this requires additional firmware in the SPI device
BIOS Hotkey Pressed
OEMFlag Bit 1: Enable/Disable BIOS hotkey press.
MEBx Selection Screen
OEMFlag Bit 2: Enable/Disable MEBX selection screen.
Hiden Un-Configure ME Confirmation
OEMFlag Bit 6: Hide Un-Configure ME without password Confirmation Prompt
MEBX Debug Message Output
OEMFlag Bit 14: Enable MEBX debug message output.
Un-Configure ME
OEMFlag Bit 15: Un-Configure ME without password.
Amt Wait Timer
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Disable ME
Set ME to Soft Temporary Disabled.
ASF
Enable/Disable Alert Specification Format.
Activate Remote Assistance Process
Trigger CIRA boot.
USB Configure
Enable/Disable USB Configure function.