ADLINK Express-HR User Manual
Page 48
Express-HR User’s Manual
Page 48
9.4.11 ADT 7490 H/W Monitor
This option allows the user to view and configure the parameters of the ADT7490 hardware
monitor.
EHCI Hand-off
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change
should be claimed by EHCI driver. Configuration options: Enable, Disable.
USB Transfer Time-out
The time-out value for Control, Bulk, and Interrupt transfers. Options: 10, 20, 30, 40 sec.
Device Reset Timeout
USB mass storage device Start Unit command timeout. Options: 10, 20, 30, 40 sec.
Device Power-up Delay
Sets USB device power-up delay to Auto or Manual.
Mass Storage Devices
Allows the user to set the connected USB devices to emulate as a specific type. Option:
Auto, Floppy, Force FDD, Hard Disk, CD-ROM.