ADLINK cExpress-BL - Manual (Page 55)

cExpress-BL Page 55
Feature Options Description
1920X1200
1440X900
1600X900
1024X768 LVDS2
1280X800
1920X1080
2048X1536
Active LFP No LVDS
Edp Port-A Select the Active LFP Configuration.
Panel Color Depth 18 Bit
24 Bit Select the LFP Panel Color Depth
Panel Scaling Auto
Off
Force Scaling Select the LCD panel scaling option used by the Internal Graphics Device.
GT – Power Management Control Info only
GT Info Info only Display GT info of Intel Graphics.
RC6 (Render Standby) Enabled
Disabled Check to enable render standby support.
GT OverClocking Support Enabled
Disabled Enable / Disable GT OverClocking Support.
GT OverClocking Frequency XX Overclocked RP0 Frequency (MLC Clk) in multiples of 50 MHz
GT OverClocking Voltage XX Extra voltage needed above the original RP0 voltage - The unit is 1/256 volt
7.3.4 Advanced > SATA Submenu
Feature Options Description
SATA Controller(s) Enabled
Disabled Enable / Disable SATA Device.
SATA Mode Selection IDE
AHCI
RAID Determines how SATA controller(s) operate.
SATA Test Mode Enabled
Disabled Enable / Disable Test Mode.
Aggressive LPM Support Enabled
Disabled Enable PCH to aggressively enter link power state.
SATA Controller Speed Gen1
Gen2
Gen3 Indicates the maximum speed the SATA controller can support.
Intel ® Rapid Start Technology Submenu
SATA Port Configuration Submenu
Software Feature Mask Configuration Info only
RAID0 Enabled
Disabled Enable / Disable RAID0 feature.