ADLINK Express-BASE6 - Manual (Page 36)

Express-BASE6 User’s Manual Page 36
8 Switches, POST, LEDs & Power
8.1 Mini Switches (SW1~4)
There are two mini switches at the top left corner
of the board.
The SW1 switch is the ATX Power Button.
The SW2 switch is the Reset Button.
8.2 Module Type Display
To the left of the Express Card socket ,
6 mini LEDs (LED6 ~11) indicate the type
of COM Express module installed on the
Express-BASE6.
COM Express type: 1-2, 3, 4, 5, 6 or wrong pinout
At the top edge of the board are two more
switches.
The SW3 switch is the Sleep Button and the
SW4 switch is the Lid Button. Both buttons
support Type 6 modules for ACPI power
management behavior settings in an OS
environment.
SW1
SW2
SW3 SW4