ADLINK nanoX-BT - Manual (Page 51)

nanoX-BT Page 51
Feature Options Description
Redirection After BIOS Post Always Enabled
BootLoader The Settings specify if BootLoader is selected, then legacy
console redirection is disabled before booting to legacy OS.
Default value is Always Enable which means legacy console
redirection is enabled for legacy OS.
7.3.12. Thermal
Feature Options Description
Thermal Info only
CPU Temperature Info only
Critical Trip Point Disabled
85 C
95 C This value controls the temperature of the ACPI Critical Trip Point -
the point at which the OS will shut the system down.
Active Cooling Trip Point Disabled
40 C
50 C
60 C
70 C
BMC Default Active Cooling Trip Point.
Passive Trip Point Disabled
90 C
80 C This value controls the temperature of the ACPI Passive Trip Point -
the point at which the OS will begin throtting the processor.
Passive TC1 Value 1 This value sets the TC1 value for the ACPI Passive Cooling
Formula. Range 1 - 16
Passive TC2 Value 5 This value value sets the TC2 value for the ACPI Passive Cooling
Formula. Range 1 - 16
Passive TSP Value 10 This item sets the TSP value for the ACPI Passive Cooling Formula.
It represents in tenths of a second how often the OS will read the
temperature when passive cooling is enabled. Range 2 - 32
7.3.13. Miscellaneous
Feature Options Description
Miscellaneous Info only
High Precision Timer Enabled
Disabled Enable or disable the High Precision Event Timer.
SCC Configuration Submenu
Security Info only
BIOS Security Configuration Submenu
Trusted Computing Submenu
7.3.13.1. Miscellaneous > SCC Configuration
Feature Options Description
OS Selection Windows 8.X
Android
Windows 7 OS Selection
SCC Devices Mode ACPI mode
PCI mode SCC devices mode setting.