ADLINK nanoX-TC - Manual (Page 30)

nanoX-TC User’s Manual Page 30
8 BIOS Setup Utility
The following chapter describes basic navigation for the AMIBIOS8 BIOS setup utility.
8.1 Starting the BIOS
To enter the setup screen, follow these steps:
1. Power on the motherboard
2. Press the < Delete > key on your keyboard when you see the following text prompt:
< Press DEL or Delete to run Setup >
3. After you press the < Delete > key, the main BIOS setup menu displays. You can
access the other setup screens from the main BIOS setup menu, such as Chipset and
Power menus.
In most cases, the < Delete > key is used to invoke the setup screen. There are several
cases that use other keys, such as < F1 >, < F2 >, and so on.