ADLINK nanoX-TC - Manual (Page 47)

Page 47 Express-IA533 User’s Manual Page 47 Express-IA533 User’s Manual nanoX-TC User’s Manual Page 47
8.6 Boot Setup
Select the Boot tab from the setup screen to enter the Boot Setup screen.
Quiet Boot
Disabled - Set this value to allow the computer system to display the POST messages.
Enabled - Set this value to allow the computer system to display the OEM logo.
Fast Boot
Disabled - Set this value to allow the BIOS to perform all POST tests.
Enabled - Set this value to allow the BIOS to skip certain POST tests to boot faster.
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535 (0xFFFF) means wait indefinitely.
Bootup Num-Lock
Set this value to allow the Number Lock setting to be modified during boot up.
Off - This option does not enable the keyboard Number Lock automatically. To use the 10-
keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the
10-key pad. The Number Lock LED on the keyboard will light up when the Number Lock is
engaged.
On - Set this value to allow the Number Lock on the keyboard to be enabled automatically
when the computer system is boot up. This allows the immediate use of 10-keys numeric
keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on
the keyboard will be lit.
Boot Option Priorities
This option sets the priorities of the boot options. The user can change the priorities by
selecting the particular boot option. The device selected in Boot option #1 will be the first
priority, followed by second, third and so on.