5 install the wdt driver – ADLINK MXC-4000 Series User Manual
Page 74
64
BIOS Settings and Driver Installation
4.2.5
Install the WDT Driver
A WDT (watchdog timer) is a hardware mechanism to reset the
system when the operating system or application is halted. A typi-
cal usage of WDT is to start the timers and periodically reset the
timer, and when timer is expired, the system resets. You need to
install the WDT driver to program the WDT.
Please follow the following steps to install WDT driver for theMXC-
4000 series
1. Close any running application.
2. Insert the ADLINK All-in-One DVD. The WDT driver is
located in the directory:
x:\Driver Installation\Matrix\MXC-4000\WDT\
where x: denotes the DVD-ROM drive.
3. Execute setup.exe and follow on-screen instructions to
complete the setup.
4. After installation completes, reboot your system.