ADLINK MXE-200i - Manual (Page 23)

Introduction 9
MXE-200
power LED lit. If the system hangs, depressing the button for 5
seconds powers down the system.
1.6.2 LED Indicators
In addition to the LED of the power button, three LEDs on the front
panel indicate the following operations.
Table 1-2: LED Indicators
1.6.3 Reset Button
The reset button executes hard reset for the MXE-200.
Indicator Color Description
Watchdog (WDT) Yellow
Indicates watchdog timer status.
Flashes when watchdog timer starts,
and when timer is expired, system will
auto-reboots.
Hard disk drive Orange
When blinking, indicates the SATA hard
driver is active
Standby Blue
Indicates the system is in power
standby mode