ADLINK TRL-40 - Manual (Page 23)

Introduction 13
TRL-40
LAN Port (NIC0/1, RJ-45)
Refer to the tables below for the LAN port pin and LED definitions.
USB Connectors
Pin #
10BASE-T/
100BASE-TX
1000BASE-T
1 TX+ BI_DA+
2 TX- BI_DA-
3 RX+ BI_DB+
4 -- BI_DC+
5 -- BI_DC-
6 RX- BI_DB-
7 -- BI_DD+
8 -- BI_DD-
LAN Status LED1 (left) LED2(right)
Network link is not established
or system power off
OFF OFF
10 Mbps OFF Blinking
100 Mbps Green Blinking
1000 Mbps Orange Blinking
WARNING:
NIC1 supports NCSI for IPMI v2.0
Pin # Signal Name
1 Vcc
2 USB-
3 USB+
4 GND
LED2 LED1
1 8