ADLINK TRL-40 - Manual (Page 33)

Getting Started 23
TRL-40
2 Getting Started
2.1 Package Contents
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing mate-
rials for inspection. Obtain authorization from the dealer before
returning any product to ADLINK.
X TRL-40 system server
X Driver CD
X Quick Start Guide
2.2 Driver Installation
The following provides information on how to install the TRL-40
device drivers in Windows 7 64-bit. The device drivers are located
in the following ADLINK All-in-One CD directories:
To install the required TRL-40 drivers:
1. Install the Windows operating system before installing
any driver. Most standard I/O device drivers are installed
during Windows installation.
2. Install the Display driver by opening device manager.
Navigate to the INF located in X:\IMB-S90\Graph-
ics\v098_whql
\Windows_WDDM\Win7_S08R2_x64. Follow the
instructions given and reboot when instructed.
3. Install the Chipset driver by running the program
Setup.exe in X:\IMB-S90\Intel INF\infinst_autol for
Display X:\IMB-S90\Graphics
Chipset X:\IMB-S90\Intel INF
Ethernet X:\IMB-S90\LAN
Rapid
Storage
X:\IMB-S90\Intel RST
RAID X:\IMB-S90\Marvell