ADLINK NuPRO-A40H User Manual
Page 63
Advertising
BIOS Setup
49
NuPRO-A40H
USB transfer time-out
The time-out value for Control, bulk, and Interrupt transfers.
Device reset time-out
USB mass storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports
itself to the Host Controller. 'Auto' uses default value: for a Root
port it is 100ms, for a Hub port the delay is taken from Hub
descriptor.
Mass Storage Devices:
Mass storage device emulation type. 'AUTO' enumerates
devices according to their media format. Optical drives are
emulated as 'CDROM', drives with no media will be emulated
according to a drive type. Options: Auto, Floppy, Forced FDD,
Hard Disk, CD-ROM.
Advertising