4 installing expansion cards (pci and pci express), Installing expansion cards (pci and pci express) – ADLINK IMB-M42H User Manual
Page 22
12
Getting Started
2.4
Installing Expansion Cards (PCI and PCI
Express)
The IMB-M42H provides:
X
4x PCI slots receiving expansion cards with 32-bit PCI inter-
face
X
2x PCIE (PCI Express) slots, PCIE1 (PCIE x16 slot; blue)
for PCI Express x16 lane width graphics cards, and PCIE3
(PCIE x4 slot; white) for PCI Express x4 lane width I/O
cards
Before installing expansion cards, ensure the power supply is
switched off or disconnected. Check the card's documentation and
perform requisite system configurations before installation.
1. Remove the system unit cover (if the motherboard is
installed in a chassis).
2. Remove the bracket facing the destination slot.
3. Align the card connector with the slot and press firmly
until the card is securely seated.
4. Fix the card to the chassis with screws.
5. Replace the system cover.