ADLINK IMB-M42H - Manual (Page 33)

UEFI Setup Utility 23
IMB-M42H
Appendix A - UEFI Setup Utility
A.1 Introduction
This section explains how to use the UEFI Setup Utility to config-
ure your system. The UEFI chip on the motherboard stores the
UEFI Setup Utility. You may run the UEFI Setup Utility when you
start up the computer. Select <F2> or <Del> during the
Power-On-Self-Test (POST) to enter the UEFI Setup Utility, other-
wise, POST will continue with its test routines.
To enter the UEFI Setup Utility after POST, restart the system by
pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button
on the system chassis. You may also restart by turning the system
off and then back on.
A.2 UEFI Menu Bar
The top of the screen has a menu bar with the following selec-
tions:
Use arrow keys to choose among the selections on the menu bar,
and select Enter to access the sub screen. The mouse can also be
used to select items
NOTE: NOTE:
Because the UEFI software is frequently updated, the setup
screens and descriptions provided are for reference only, and
may not conform exactly with those displayed.
Main Configures system time/date information
Advanced Sets up advanced UEFI features
H/W Monitor Displays current hardware status
Boot Sets default system device to locate and load OS
Security Sets up security features
Exit Exits the current screen or UEFI Setup Utility