ADLINK IMB-M40H - Manual (Page 44)

32 Getting Started
3.3 Installing Memory Modules
The IMB-M40H supports up to 16 GB of DDR3 1066/1333 MHz
(2nd Gen Intel® Core™) or 1333/1600 MHz (3rd Gen Intel®
Core™) memory modules in two DIMM sockets. A DDR3 module
has a 240-pin footprint compared to the legacy 184-pin DDR
DIMM. DDR3 modules are notched to facilitate correct installation
in the DIMM sockets and prevent installation of DDR2 or DDR
modules.
Memory Configuration Options
The IMB-M40H supports 1GB, 2GB, 4GB and 8GB unbuffered
non-ECC DDR3 DIMMs in the following configurations:
X Channel A: DIMM_A1
Channel B: DIMM_B1
X For dual-channel configuration, the total size of memory
module installed per channel must be the same
(DIMM_A1 = DIMM_B1).
X It is recommended that you install DIMMs with the same
CAS latency. For maximum compatibility, install memory
modules with the same brand, model, and/or rating.
WARNING:
Disconnect all power to the board before installing a memory
module to prevent damaging the board and memory module.