ADLINK IMB-M40H - Manual (Page 47)

Driver Installation 35
IMB-M40H
4 Driver Installation
This chapter provides information on how to install the IMB-M40H
device drivers under Windows XP. The device drivers are located
in the following ADLINK All-in-One CD directories:
Follow the instructions below to install the required IMB-M40H
drivers:
1. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during
Windows installation.
2. Install the Microsoft .NET Framework by running the
program dotnetfx35.exe in X:\OTHERS\Microsoft .NET
Framework 3.5.zip. Follow the instructions given and
reboot when instructed.
3. Install the Chipset driver by running the program
infinst_autol.exe in X:\CHIP\Chipset driver_intel_INF
_Update_Utility_All_WinOS.zip. Follow the instructions
given and reboot when instructed.
4. Install the Display driver and utilities by running the program
Setup.exe in X:\VGA\IvyBridge\VGA_driver_
intel_Integrated_Graphic_Windows XP_32bit.zip. Follow
the instructions given and reboot when instructed.
5. Install the Ethernet driver by running the program setup.exe
in X:\LAN\Network_driver_Realtek_Network
_Adapter for window XP 32-bit.zip. Follow the instructions
given and reboot if required.
6. Install the Audio driver by running the program WDM_R270.exe
in X:\AUDIO\Audio_driver_Realtek_Windows XP.zip. Follow
the instructions given and reboot if required.
Chipset X:\CHIP
Display X:\VGA
Ethernet X:\LAN
Audio X:\AUDIO
.NET X:\OTHERS