ADLINK AmITX-BT-I - Manual (Page 9)

AmITX-BT-I Page 9
2.4. Form Factor
¾ Mini-ITX: 170mm x 170mm
2.5. SEMA Board Controller
¾ ADLINK Smart Embedded Management Agent (SEMA)
• Voltage/Current monitoring
• Power sequence debug support
• AT/ATX mode control
• Logistics and Forensic information
• Flat Panel Control
• General Purpose I2C
• Failsafe BIOS (dual BIOS )
• Watchdog Timer and Fan Control
2.6. Debug Header
¾ 40-pin Multipurpose Flat Cable Connector:, used in combination with DB-40 debug module providing BIOS POST code LED, BMC
access, SPI BIOS flashing, Power Testpoints, Debug LEDs
2.7. Video
¾ GPU Feature Support: 7th generation graphics Intel core architecture with four execution units supporting two independent displays
• 3D graphics hardware acceleration
• Support for DirectX11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2
• Video decode hardware acceleration including support for H.264, MPEG2, VC-1, WMV and VP8 formats
• Video encode hardware acceleration including support for H.264, MPEG2 and MVC formatsPlayback of Blu-ray disc S3D content
using HDMI (1.4a spec compliant with 3D)
Note: Availability of features may vary between operating systems.
¾ Display Interface support
• VGA: Analog VGA supporting resolutions up to 2560x1600 x24bpp at 60 Hz
• HDMI: HDMI 1.3a
• LVDS: Supports non-EDID type LCD panels only, Single/Dual Channel 18 and 24-bit, supports 1920 x 1200 at 60 Hz resolution in
dual LVDS bus mode
2.8. Audio
¾ Integrated: Intel® HD Audio integrated in SOC
¾ Audio Codec: ALC886
2.9. LAN
¾ Intel MAC/PHY: Intel® i211AT (MAC/PHY) Ethernet controller
¾ Interface: 10/100/1000 GbE connection
2.10. Power Specificatio
¾ Power Modes: AT and ATX mode (AT mode start controlled by BMC)
¾ Standard Voltage Input: ATX = 12V ±5%, 5Vsb ±5% or AT = 12V ±5%
¾ Power Management: ACPI 4.0 compliant
¾ Power States: Supports C1-C6, S0, S1, S4, S3, S5, (Wake-on-USB S3/S4, WoL S3/S4/S5)