ADLINK MCS-2040 - Manual (Page 51)

51
MCS-2040
8. Review the Password Policy setting shown in the Intel AMT Configuration screen.
This setting specifies when it is possible to change the MEBx password over the network.
As shown below, options are:
Default Password Only
You can change the MEBx password via the network interface if the default password has
not yet been changed.
During Setup and Configuration
You can change the MEBx password via the network interface during the setup and
configuration process but at no other time. Once setup and configuration is complete, the
password cannot be changed via the network interface.
Anytime
(recommended; default setting)
You can change the MEBx password via the network interface at any time.