ADLINK CoreModule 745 - Manual (Page 7)

CoreModule 745 Reference Manual 1
Chapter 1 About This Manual
Purpose of this Manual
This manual is for designers of systems based on the CoreModule ® 745 Single Board Computer (SBC). This
manual contains information that permits designers to create an embedded system based on specific design
requirements.
Information provided in this reference manual includes:
• Product Overview
• Hardware Specifications
• BIOS Setup information
• Technical Support Contact Information
Information not provided in this reference manual includes:
• Detailed chip specifications
• Internal component operation
• Internal registers or signal operations
• Bus or signal timing for industry standard busses and signals
• Pinout definitions for industry standard interfaces
References
The following list of references may help you successfully complete your custom design.
Specifications
• PC/104 Specification, Revision 2.5, November, 2003
• PC/104-Plus Specification, Revision 2.0, November, 2003
For latest revision of the PC/104 specifications, contact the PC/104 Consortium, at:
Web site: http://www.pc104.org
• PCI 2.3 Compliant Specifications, Revision 2.3, March 29, 2002
For latest revision of the PCI specifications, contact the PCI Special Interest Group at:
Web site: http://www.pcisig.com
• AMI BIOS Core 8 User’s Guide
Web site: http://www.ami.com/support/doc/MAN-EZP-80.pdf
Chip Specifications
The following integrated circuits (ICs) are used in the CoreModule 745 single board computer:
• Intel  Corporation and the Atom™ N400 and D500 series processors
Web site: http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-400-500/hardware
• Intel Corporation and the ICH8-M chip, used for the I/O Hub (Southbridge)
Data sheet: http://www.intel.com/assets/pdf/datasheet/313056.pdf
• SMSC and the Super I/O SCH3112I-NU chip used for the Super I/O controller
Data sheet: http://www.smsc.com/media/Downloads_Public/Data_Briefs/311xdb.pdf