American Sanders FloorCrafter Belt Sander - Manual (Page 5)

EN ENGLISH
Clarke ® American Sanders Operator's Manual (EN) - Floorcrafter - 5 -
Introduction and Machine Specifications
MODEL 07104A 56380917
Electrical Requirements 230~, 60Hz / 15.7 A, 3.7 kW 230~, 50Hz / 16.0 A, 3.0 kW
Sound Emisson (Lpm) 93.0 dB(A) 96.2 dB(A)
Vibration <.15 in/s 2.88 m/s 2 rms
Motor 4 Hp Induction 3 kW Induction
Contact Wheel Rate 2450 rpm 2042 rpm
Abrasive Rate 4500 ft/min 3750 ft/min
Abrasive Size 29½” x 7 7 /
8
” 29½” x 7 7 /
8
”
Fan Flow Rate 234 CFM 195 CFM
Drum Settings 80 lbs., 70lbs., 60 lbs. 80 lbs., 70lbs., 60 lbs.
Overload Protection Magnetic Circuit Breaker Magnetic Circuit Breaker
Electrical Cable 50’, 10-3 SJO LP-20P Plug 100’, 12-3 SJO AU2-15P Plug
Operating Controls Adjustable Lever/Grip Adjustable Lever/Grip
Leveling Controls Externally Adjustable Externally Adjustable
Operating Wheels 80 Durometer Clear Urethane 80 Durometer Clear Urethane
Weight 204 lbs. 204 lbs.
Dimensions 35 x 13 3 /
4
x 38 3 /
4
35 x 13 3 /
4
x 38 3 /
4
CAUTION: Your equipment may be inappropriate on some installations. Some softer woods used in floor-
ing cannot support the pressure created by hard wheels.
Always consult with the flooring manufacturer on the proper installation, preparation, and finish-
ing of their product. Determine suitability of your equipment in preparing the product.