Cisco BBSM 1 User Manual
Page 7
2-7
Cisco BBSM Hotspot 1.0 User Guide
78-15293-01
Chapter 2 Setting Up BBSM Hotspot
Running the Setup Wizard
Step 6
Click Next. The Calculating TCP/IP Addresses window appears. BBSM Hotspot uses the information
provided in the Enter External and Internal IP Addresses window to calculate TCP/IP addresses for the
server.
Note
If you need to change the IP addresses of the NICs from the defaults generated by the Setup Wizard, you
must use the Address Change Wizard to make these changes. Continue with and complete the Setup
Wizard, then use the Address Change Wizard to change the NIC addresses to the desired settings. Refer
to the
“Running the Address Change Wizard” section on page A-1
.
(See
and
for field descriptions.)
Figure 2-4
Calculating TCP/IP Addresses Window