Bonaire 3 Star Mid Efficiency - Manual (Page 6)

3 S TAR M ID E FFICIENCY D UCTED G AS H EATER .
Page 6
Control Options
Control Options.
Manual Wall Thermostat - PNE
To operate your control simply press the ON / OFF
button. The unit will then display the default or last used
settings and will be ready to operate. Any changes made
to the control settings will have a 3 second delay before
the unit responds.
Heating Operation
STEP 1 To turn the control on, press and release
the ON/OFF button. If there is only a
central heater HEAT will automatically
display.
STEP 2 Press the UP DOWN buttons to increase or
decrease the SET TEMP.
STEP 3 The control measures the room temperature using a
thermostat inside its case. When the ROOM TEMP
is cooler than the SET TEMP the heater will come
on after approximately a 30 second ignition process.
The flame symbol will be displayed on the control to
indicate the heater is on followed by the fan symbol
when the fan comes on.
The function of the room thermostat is to maintain
the room temperature at the SET TEMP selected.
Once the heater has reached set temperature the
unit will stop. Once the room temperature has
dropped below the set point the unit will restart
maintaining the SET TEMP.
STEP 4 Press the ON/OFF button to switch the heater OFF.
CLOCK Setup
To set the 12 hour clock
STEP 1 Turn the control to OFF.
STEP 2 Press the UP or DOWN button for 3 seconds to
activate time change
STEP 3 Using the UP button, adjust the hours. Adjustment is
forward only.
STEP 4 Using the DOWN button, adjust the minutes.
Adjustment is forward only.
Time setup is now complete. Turn unit on to
resume operation of your product.