Bonaire Durango Window Cooler - Manual (Page 10)

B ONAIRE D URANGO W INDOW C OOLER
Installation
External Fixing of the Unit
•
Ensure that the location chosen to mount the cooler is strong enough to support the
operating weight of the unit. The unit’s nominal operating weight is 42 kg.
•
Ensure that the window opening is large enough for the neck of the cooler (nominally
550mm high by 550mm wide).
•
Ensure there is a minimum 100mm (4”) clearance above the external cabinet for
maintenance purposes.
•
Position the cooler through the window (two or more people will be required for this) so
that the unit is hard up against the outside wall of the house.
Note that if the cooler does
not fit hard up against the
outside wall (e.g. a
protruding timber or brick
window sill), utilise a spacer
block of wood (not
provided) which must be
attached to the wall (the
unit is then fixed to this
wood).
•
Ensure there is a 100mm (4”) clearance above the unit so the rear panel can be
remove for service
•
Ensure that the unit is installed level in the vertical and horizontal positions as
illustrated, prior to fixing the cooler.
Page 10 WEAC628