Bonaire Durango Window Cooler - Manual (Page 7)

B ONAIRE D URANGO W INDOW C OOLER
Operation Instructions
WEAC628
C OOLER O PERATION
Before Starting
•
Always ensure that there is another open window or door through which the air can
exhaust to other parts of the house. Refer page 5 correct operation and ventilation.
•
Ensure that the filters are kept clean.
•
Ensure that the water to the cooler is turned on.
•
Ensure the plug is connected to a 240V 50Hz single phase grounded appliance socket
on the inside of the house and turned on.
•
IMPORTANT. After the first 10 hours of operation in COOL mode, the water must
be drained from the unit water tank to remove any new product residuals. This
process must be repeated after a further 10 hours of COOL mode operation. (See
page 13 for removing the over flow pipe.)
Operating the unit
The Durango window cooler can be operated in either of 2 modes, COOL or FAN.
•
COOL Mode.
Move control knob to “COOL” side. Select
desired fan speed
1 - Sleep Mode
2 - Normal Operation
Max - Quick Cool down
The unit will now operate with the fan
motor and water pump activated.
•
FAN Mode
Move the control knob to the “FAN” side
(pump isolated). Select desired fan speed
1 - Sleep Mode
2 - Normal Operation
Max - Quick Cool down
The unit will now operate with the fan motor
only activated.
•
To turn the unit off, rotate the control knob to
the O position
Page 7