Chicago Gaming Extreme Arcade - Manual (Page 7)

7
4.3 Preassembly
Please find all the parts shown below in this section [C1, C2, C5, C6, C7, C9, H1 and H2]. You
will see a series of pilot holes (small holes drilled only ¼” into the wood) on each part shown
below. Align the appropriate bracket (H1 or H2 as indicated below) with the pilot holes. Screw
two screws [H6] through the bracket [H1 or H2] into the pilot hole in the wood. It will be easier
to align the second screw if you don’t tighten the first screw all the way down before starting the
second screw.
H1 Standard Angle Bracket (Silver) H2 Threaded Angle Bracket (Gold)