Cino PL680BT HC - Manual (Page 41)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
33
PROGRAM
Symbology Reading Control
♦ UPC-A & UPC-E Setting ♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
UPC Supplement Setting SS
SS
SS
SS
SS
SS
SS
SS Select UPC without supplement digits
Select UPC with only 2 supplement digits
Select UPC with only 5 supplement digits
Select UPC with 2/5 supplement digits
Disable force supplement digits output
Enable force supplement digits output
UPC Family Addenda Separator Off
UPC Family Addenda Separator On 0
1
2
3
4
5
6
7
UPC/EAN Security Level SS
SS
SS Level 0
Level 1
Level 2
Only available for UPC-A & EAN-13
0
1
2
Supplement Scan Voting SS
SS
SS
SS
SS
SS
SS None
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
Level 11
Level 12
Level 13 0
1
2
3
4
5
6 7
8
9
A
B
C
D
UPC/EAN Security Level
The scanner offers three levels of decode security for UPC/EAN bar codes:
Level 0: If you are experiencing misread of poorly-printed or out-of-spec. bar codes, especially in characters 1, 2, 7, and 8 in level 1, please select level 0. Selection of this
security level may significantly impair the decoding ability of the scanner.
Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” UPC/EAN bar codes.
Level 2: If you are experiencing misread of poorly-printed, soiled or damage bar codes in level 1, please select level 2. This is the most aggressive setting and may
increase the misread.
The Supplement Scan Voting is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is transmitted. It is helpful when decoding
a mix of UPC/EAN symbols with and without supplement digits. This function is effective when you select UPC/EAN with only 2 supplement digits, UPC/EAN with only 5
supplement digits or UPC/EAN with 2/5 supplement digits. The default value is Level 3. When you select higher level, it may impact the reading speed on poorly-printed,
low contrast or damage barcode labels.